Cookie Img
Send Inquiry Send SMS
Home » Products » Fire System Accessories » Zener Barrier

Zener Barrier

<< Previous   Zener Barrier   Next >>
Product Description

Zener Barrier

This is a 2 wire device which can pass an electric signal in either direction but limit the transfer of energy. 

When connected between equipment installed in a safe area and fire sensors mounted in a hazard area these devises will limit the power entering the Hazard area in the case of a fault condition in the safe area.

These barriers have 30v Zener diodes which limit the voltage entering the hazzard area. They are wired in series with a resistor and electronic fuse in each leg. They are polarity  sensitive designed to be used to protect floating supply equipment.Any fault transients bet ween Positive and negative are shunted between the two inputs and transients between an input and earth are shunted to earth. In case the current level rises beyond the safe limit then a fuse will interrupts this current. The Fuse will automatically reset itself when the fault condition no longer exist.  


Model: ZB-28-05

Hazard Area Side. 


  • Max voltage 28v DC. 
  • Max Current 50mA.


Safe Area side.


  • Max voltage 30v
  • Normal Current 2 mA.
  • Alarm Current 10 mA
  • Max Fault voltage 230v
  • Max Fault current 50 mA.


Above ratings are measured between two inputs. Max Voltage from input to earth. Positive or negative 30v. 

Product Code : ZB-28-05

Other Products in 'Fire System Accessories' category
Digital Input Module
Digital Input Module
PA Controller Console
PA Controller Console
Addressable Modules
Addressable Modules
Zone Interface Module
Zone Interface Module
Auto Dialer
Auto Dialer
<< Back

A-149, 1st Floor, Ghatkopar Industrial Estate, Amrut Nagar, L.B.S. Marg, Ghatkopar (W), Mumbai - 400086, Maharashtra, India
Mr. Vikas Sanas (Sales Department)
Send SMS Send Inquiry

Buyers Helpdesk

Let find Quality Suppliers for you!

I agree to abide by all the Terms and Conditions of
PCD FIRE SYSTEMS All Rights Reserved.